EOS-1D X Mark III is Canon’s latest generation of professional SLR cameras. It is equipped with Canon’s newly developed high-performance digital image processor DIGIC X, and a full-frame image sensor with low noise of approximately 20.1 million effective pixels. When shooting with the optical viewfinder, the EOS-1D X Mark III can achieve a high-speed continuous shooting of up to about 16 frames per second; and in the live view mode, its continuous shooting speed can reach a maximum of about 20 frames per second. In terms of focusing, the machine has an astonishing maximum of 191 AF points, among which the cross-type focus point is as high as 155. At present, the new machine has arrived. Let’s talk about the EOS-1D X Mark III, which is a four-year wait, from the aspects of design and workmanship.
In the overall design, EOS-1D X Mark III adopts professional The design of two sets of shutter handles, which are common in high-grade cameras, is convenient for professional photographers to quickly switch between horizontal and vertical compositions, and the integrated body can also provide better reliability.
On the back of the fuselage, the EOS-1D X Mark III follows the tradition The button layout design of, for users who are used to the previous Canon models, it should be said that it is not difficult to get started.
On the side of the fuselage, a variety of interfaces are available for easy access Connect various accessories.
The handle of EOS-1D X Mark III is generous and full, and The leather feel is good, this kind of feel is difficult to describe, but it is comfortable to get started.
The front of the camera, the mount is Canon’s classic EF port, compatible Sex and excellent lens quality have always been the biggest advantages of Canon EOS system.
Rear operating area, AF- of EOS-1D X Mark III The ON autofocus drive button adopts a new design. In addition to driving the lens for autofocus, this button can also be used to select the point/area of autofocus by sliding the finger. From the actual experience, the button can be operated with touch under the two systems of optical viewfinder and real-time viewfinder. The experience is good, and it can be regarded as a highly completed innovative design.
For the screen, Canon EOS-1D X Mark III uses one A 3.2-inch 3:2 touch screen with approximately 2.1 million dots, supports adjusting the color temperature of warm and cold, and the display effect can meet most shooting needs.
In addition to the main display, EOS-1D X Mark III has a shoulder The screen and file display screen can display more information in time, so that the photographer can know it at any time.
The backlight of EOS-1D X Mark III’s shoulder screen is orange, The fuselage buttons also support backlighting, which is convenient for outdoor photographers in the starry sky to shoot at night.
Different from other non-professional bodies, Canon’s 1D series machines The mode switching of the model is operated by the mode button + dial on the left shoulder of the fuselage, which can reduce the possibility of misoperation during intense shooting.
You can see the EOS-1D X Mark III at the bottom of the fuselage It is made in Japan, so there is no need to worry about the quality.
As a professional camera, EOS-1D X Mark III The fuselage is covered with various locks to prevent the user from accidentally opening the door to cause accidents. Lift the knob at the bottom left of the fuselage and rotate it to take out the battery compartment.
EOS-1D X Mark III inherits EOS-1D X Mark The LP-E19 battery used on II has good versatility. The battery capacity is 30Wh, and the CIPA standard battery life is up to 2850 sheets. It is a pity that although the body uses a USB Type-C interface, it does not support PD body charging. Photographers who need longer shooting time still need to prepare more batteries.
At the bottom of the fuselage, the opening of the card compartment also has a protective design. In addition, the vertical shooting handle on this side is also equipped with the touch AF-ON button mentioned above.
EOS-1D X Mark III uses a dual CFexpress card slot design , The card slot has a very high storage speed, which also enables EOS-1D X Mark III to achieve a continuous shooting number of more than 1,000 frames when shooting RAW+JPEG.
EOS-1D X Mark III side interface, support audio Input and output, shutter release interface and network transmitter interface. The new wireless file transmitter model is WFT-E9C, dedicated for special planes, and is not compatible with the previous generation WFT-E8C.
The remaining ports are RJ-45 Gigabit Ethernet ports , USB Type-C data transmission interface, mini HDMI video output interface and flash sync interface. The flagship machine is relatively rich in space, and naturally it can better cater to the needs of consumers, and has everything in interface.
In general, Canon EOS-1D X Mark III is A flagship machine with a “stable and rising” design. As a professional-grade fuselage, the design should be as “stable” as possible to allow more professional users to get started quickly. At the same time, the touch AF-ON buttons, dual CFexpress card slots, USB Type-C interface, and backlit buttons are all designed to keep up with the times and have a certain pioneering nature. In short, this EOS-1D X Mark III has a surprising design, and it can also be quickly recognized by everyone. This is probably what a flagship machine should look like.
Author:SINA,If you need to reprint,please indicate the source:http://www.todaycamera.com/camera-news/brand-new-flagship-dslr-canon-eos-1d-x-mark-iii-design-review