Sirui N-1204SK is a tripod made of carbon fiber

  Sirui N-1204SK is a tripod made of carbon fiber. It is not only light weight and high load-bearing, but also has the characteristics of being easily transformed into a monopod and a two-stage bottom bracket design. Today, I will give you a detailed introduction to this high-quality domestic carbon fiber tripod.

Sirui N-1204SK is a tripod made of carbon fiber

Sina N-1204SK

   Sina N-1204SK tripod introduction:

Sirui N-1204SK is a tripod made of carbon fiber

  Si Rui N-1204SK has a wide shooting height setting, which can adapt to various themes and shooting environments, whether it is high-angle scenery, portrait photography or low-angle overhead shots For architectural, macro close-up and other creations, this tripod can meet your needs.

Sirui N-1204SK is a tripod made of carbon fiber

SIRUI N-1204SK maximum shooting height display

  Because of the two-stage bottom bracket design, when low-angle shooting is required, SIRUI N-1204SK can remove the bottom half of the bottom half to further reduce The shooting height of the tripod.

Sirui N-1204SK is a tripod made of carbon fiber

SIRUI N-1204SK low shooting display

Sirui N-1204SK is a tripod made of carbon fiber

  two-stage bottom bracket is also made of carbon fiber

  Sirui N-1204SK’s foot tube can be adjusted in three levels, the adjustment button is semi-automatic design, press and hold the button to move the foot The tube adjusts the angle, and the button automatically returns and locks after the angle adjustment is completed.

Sirui N-1204SK is a tripod made of carbon fiber

The leg can be adjusted in three levels.

   The leg locking device of this tripod adopts a new locking circlip design, which is more stable than the old circlip and has a longer life. The locking device is attached with a large rubber ring, which brings the user a comfortable hand feeling, and the locking and releasing action can be completed in a half-circle stroke.

Sirui N-1204SK is a tripod made of carbon fiber

New leg locking device

  Sirui N-1204SK’s leg is equipped with a sponge hand guard, which can not only effectively protect the carbon fiber leg, but also give users better Feel. The fourth section of the foot tube is marked with a scale, which is convenient for users to make finer adjustments. The metal spikes in the accessory bag can be easily interchanged with rubber spikes to adapt to various shooting environments and bring a more stable shooting experience.

Sirui N-1204SK is a tripod made of carbon fiber

All three leg tubes are equipped with a sponge protective cover, so you won’t freeze your hands in winter

Sirui N-1204SK is a tripod made of carbon fiber

   The fourth section of the leg tube has a scale for finer adjustment of the tripod posture

Sirui N-1204SK is a tripod made of carbon fiberSirui N-1204SK is a tripod made of carbon fiber

   provides rubber pads and foot nails to meet different shooting environments

   remove one of the foot tubes and connect it to the gimbal With the combination of base and gimbal, N-1204SK instantly transforms into a monopod. In addition, we can also use the bottom half of the central axis to connect with the leg tube to further increase the shooting height of the monopod.

Sirui N-1204SK is a tripod made of carbon fiber

Turn into a monopod

Sirui N-1204SK is a tripod made of carbon fiber

  Using the bottom half of the central axis to increase the height of the monopod

  A 1/4 screw port is also set on the tripod to facilitate users to connect various equipment. For example, when we use the main equipment to shoot, we can also use the expansion capability of the 1/4 screw port to connect sports cameras, mobile phones, etc. for live broadcast and secondary creation.

Sirui N-1204SK is a tripod made of carbon fiber

1/4 screw port can be used for external equipment

  Si Rui N-1204SK can be folded and stored, and the length after storage is only 465mm, which provides convenience for users to carry. In the packaging, Siri also provides a tripod storage bag. The storage bag is solid and easy to carry, which provides good protection for the tripod.

Sirui N-1204SK is a tripod made of carbon fiber

N-1204SK reflex storage

Sirui N-1204SK is a tripod made of carbon fiber

  Sirui tripod storage bag

  Sirui K10X gimbal close-up

   is matched with N-1204SK is a ball-shaped gimbal of model K10X, which is also The star product of Siri Yuntai. The surface of the SIRUI K10X ball head is treated with hard anodizing, which has a good texture and provides good wear resistance. The quick release plate of SIRUI KX10 has a large area, and the three mounting rails are more versatile. In addition, there are specially set up holes for camera wrist straps, which is convenient for photographers who like to use camera wrist straps.

Sirui N-1204SK is a tripod made of carbon fiber

SIRUI K10X ball head

Sirui N-1204SK is a tripod made of carbon fiber

  Quick release plate area is large and the equipment is highly versatile

   There are three knobs on the K10X PTZ, which are responsible for the quick release plate locking, ball table adjustment and horizontal rotation of the PTZ. In actual use, these three knobs have a good operating feel, and even female users with less strength can easily adjust them. The knob that controls the attitude of the ball table is also equipped with a damping fine-tuning memory scale mark, “0” is the minimum damping, and the damping will gradually increase as the number increases. It is convenient for the user to adjust the appropriate damping and memorize it according to the equipment and its own situation.

Sirui N-1204SK is a tripod made of carbon fiber

The operation of the three knobs on the table is very good

Sirui N-1204SK is a tripod made of carbon fiber

   damping fine-tuning memory scale mark

   The damping adjustment knob is added to the knob that controls the attitude of the table, which can reverse the damping lock. After tightening this knob, the damping can only be tight. loose.

Sirui N-1204SK is a tripod made of carbon fiber

Damping adjustment knob

   Thanks to the special red quick-release plate release button, the installation and removal of the quick-release plate is very convenient. After rotating the quick-release plate locking device, press the red release button to remove the quick-release plate. Such a design is not only convenient for users to use, but also can effectively protect the equipment to avoid accidents.

Sirui N-1204SK is a tripod made of carbon fiber

Red quick release plate release button

   K10X gimbal is equipped with three level gauges beside the quick release plate and on the side of the gimbal, which are responsible for horizontal plane correction, vertical horizontal correction, and horizontal one-way horizontal correction. The spirit level allows users to better adjust the camera posture when shooting, helping users to better compose pictures.

Sirui N-1204SK is a tripod made of carbon fiber

The spirit level is convenient for users to compose images

Sirui N-1204SK is a tripod made of carbon fiber

The 360-degree horizontal scale at the bottom of the   

   The pan-tilt base has a 360-degree horizontal scale, which provides an angle reference for the user to shoot panoramic splices in landscape photography.

   Conclusion:

   Sirui N-1204SK tripod kit that currently includes K10X gimbal is priced at 1,663 yuan in Jingdong Mall, and the price excluding gimbal is 1366 yuan. For such a carbon fiber tripod with solid workmanship and well-designed details, I think the price is relatively reasonable.

Author:SINA,If you need to reprint,please indicate the source:http://www.todaycamera.com/camera-reviews/sirui-n-1204sk-is-a-tripod-made-of-carbon-fiber