The great god 3D printed a camera, the sample is comparable to the movie screen

   Today’s protagonist is a photographer from the United States, or more accurately, Ethan Moses, who can be called a device enthusiast. Thanks to the love of equipment, a 3D printing camera manufacturing company named CAMERADACTYL has been established. Here, he shared with us why he is so enthusiastic about designing and producing new film cameras when this film has become a niche plaything, and he also showed us some of the cameras he made and the samples he took.

The great god 3D printed a camera, the sample is comparable to the movie screen

  EthanMoses’ CAMERADACTYL Camera website

The great god 3D printed a camera, the sample is comparable to the movie screen

   completely CAMERADACTYLBrancopan’s wide-format camera made by 3D printing

   Initially, Ethan’s interest in “manufacturing” came from the purpose of transferring several Mamiya medium-format lenses to other cameras. At that time, he made several special adapter rings independently, and thus also met a friend who also liked handmade cameras as he, and sold the adapter rings he made to people with similar needs.

The great god 3D printed a camera, the sample is comparable to the movie screenThe great god 3D printed a camera, the sample is comparable to the movie screen

  CAMERADACTYLBrancopan wide-format camera uses 35mm film, can install Mamiya Press lens

   until Later, he and EricBranco, the famous Hollywood film director of photography, became strong and exchanged photography together for more than 10 years. Until recently, Eric put forward an interesting need for him-he needed a film camera that could resemble a widescreen film, but after many attempts, it could not satisfy him. For example, the famous Hasselblad X-pan can use only limited lenses and is expensive; he also used Mamiya RB67 to shoot 35mm film. Although the photos are good, they can’t be used as desired. For example, there is no camera that can shoot movies with a ratio of 1:2.4. Faced with the needs of Hollywood bigwigs, hand-made a dedicated camera was put on the agenda.

The great god 3D printed a camera, the sample is comparable to the movie screenThe great god 3D printed a camera, the sample is comparable to the movie screenThe great god 3D printed a camera, the sample is comparable to the movie screen

  CAMERADACTYLBrancopan wide-format camera sample

  The use of 3D printing is not new to Ethan. He has used 3D printing to make many products. This time, he spent a few weeks repeatedly calculating, printing, and repeatedly examining the function and size of each part, and to meet the durability of thousands of film passes and withdrawals, until finally he even referenced many mountain bikes. Ideas for accessories. It takes several weeks to design every tiny size joint and every precise film.

The great god 3D printed a camera, the sample is comparable to the movie screenThe great god 3D printed a camera, the sample is comparable to the movie screenThe great god 3D printed a camera, the sample is comparable to the movie screenThe great god 3D printed a camera, the sample is comparable to the movie screen

  CAMERADACTYLBrancopan wide-format camera sample

  Final , Ethan got a more satisfactory design and quality, whether it is the film counter, or the spring in the shutter, he personally worked on it. This camera named Brancopan uses 35mm film and can be equipped with a Mamiya Press lens. The available focal length of the lens series covers 50-250mm. The actual imaging area of ​​this camera is 24mm*58mm, which is the same ratio as the film anamorphic widescreen. . The whole camera can be of any color, and only a hex wrench is needed to assemble.

The great god 3D printed a camera, the sample is comparable to the movie screenThe great god 3D printed a camera, the sample is comparable to the movie screenThe great god 3D printed a camera, the sample is comparable to the movie screenThe great god 3D printed a camera, the sample is comparable to the movie screenThe great god 3D printed a camera, the sample is comparable to the movie screen

  CAMERADACTYLBrancopan wide-format camera sample

  After the camera was assembled, Ethan took this beloved baby and took many photos. He never carries a camera bag, and always hangs the camera around his neck at any time, whether it is mountain climbing, cross-country, crowds in New York, or even traveling around Spain. Facts have proved that the quality of the 3D printed camera is trustworthy, and the wide images obtained are also very charming.

   Interestingly, Ethan kept being asked by people next to him whether this camera was an underwater camera, perhaps because the color scheme was too similar to a diving case. But for Ethan, this is a handy camera with complete functions. It can shoot street or landscape.

The great god 3D printed a camera, the sample is comparable to the movie screenThe great god 3D printed a camera, the sample is comparable to the movie screenThe great god 3D printed a camera, the sample is comparable to the movie screenThe great god 3D printed a camera, the sample is comparable to the movie screenThe great god 3D printed a camera, the sample is comparable to the movie screenThe great god 3D printed a camera, the sample is comparable to the movie screen

  CAMERADACTYLBrancopan wide Camera sample

   In general, except for the time required for design, it takes 60-70 hours of 3D printing time to make such a camera, and 6-8 hours of assembly time, although the current cost is not comparable The Hasselblad Xpan cameras on the market are cheap, but the fun and hands-on experience are endless.

Author:SINA,If you need to reprint,please indicate the source:http://www.todaycamera.com/camera-reviews/the-great-god-3d-printed-a-camera-the-sample-is-comparable-to-the-movie-screen