The inspection before shooting improves the filming rate. Have you paid attention to these points?

  This article is from the Pacific Computer Network.   

   In daily shooting, we often encounter beautiful scenery and will not hesitate to take out the camera and shoot directly. But in many cases, if you do not pay attention to the control of some camera parameters, it is easy to produce a large image of the shooting effect, and even make the carefully shot work become “scrap film”. So today I let us introduce the parameters that need to be checked before shooting.

   Sensitivity is one of the important means to adjust exposure, we need to check its value before shooting. Although adjusting the sensitivity will not directly affect the shooting effect like the aperture and shutter, but the wrong use will still have a large impact on the shooting. In good light conditions, the shutter speed is sufficient for handheld shooting, and the sensitivity can be maintained at ISO100. After determining the aperture value, if the shutter speed is not sufficient for handheld, the sensitivity should be appropriately increased according to the actual situation to ensure the success rate of handheld shooting.

The inspection before shooting improves the filming rate. Have you paid attention to these points?

  Nikon official proofs

   For photography, the aperture not only controls the overall amount of light, but also affects the depth of field to a certain extent. Photographers who know the aperture know that the larger the aperture, the shallower the depth of field, the better the blur effect of the picture. But in shooting, such as scenery, group photo and other scenes, there is no need for a shallow depth of field. If the depth of field is too shallow, the image shooting effect may be affected. Therefore, before shooting the subject, adjust the aperture appropriately to increase the filming rate.

The inspection before shooting improves the filming rate. Have you paid attention to these points?

  Nikon official proofs

  The shutter speed is not too unfamiliar to many photographers. The shutter speed determines the exposure time of the photo. However, if the exposure time is too long, if the limit of hand-held shooting is exceeded, the situation of “blurring” and “virtual” shooting will occur. So before shooting, check whether the shutter speed is suitable for the current scene. Take hand-held shooting as an example. When shooting with the NIKKOR Z 85mm f/1.8 S under normal circumstances, when the shutter speed reaches 1/80s and above, it has a high filming rate, which is also a photography enthusiast Safety shutter often mentioned. When shooting with Z 7 or Z 6, if you encounter a scene with poor light environment, you can use the VR shock absorber, which can provide a standard equivalent to a shutter speed increase of about 5 stops. This value is obtained when the NIKKOR Z 24-70mm f/4 S lens is installed and the zoom is set at the telephoto end. )Effect. It uses the motion vector information of the image and the gyroscope sensor to detect the camera shake, and then drives the VR shock absorber to provide compensation in five directions, even if the speed is lower than the safety shutter within five gears, it can provide a higher filming rate .

The inspection before shooting improves the filming rate. Have you paid attention to these points?

  Nikon official proofs

   The seemingly simple basic parameters are often easily overlooked. Every mistake can miss a wonderful moment. Therefore, you can’t ignore the carelessness before shooting. Only by checking the basic parameters can you increase the filming rate and shoot excellent works.

Author:SINA,If you need to reprint,please indicate the source:http://www.todaycamera.com/camera-reviews/the-inspection-before-shooting-improves-the-filming-rate-have-you-paid-attention-to-these-points